Business For Sale
Buy Line continues to produce chips Incalfer
>> Continuous fryers
>> Complete lines
>> Food processing
>> Lines of French fries
|
|
|
| Line continues to produce chips Incalfer |
|
Line continues to produce chips Incalfer.
Capacity: 300 Kg/h (finished product).
Composed by:
-primary screw-Feeder Used reviewed.
Receiving silo potatoes totally built in stainless steel 304.
Screw conveyor (helical) built in stainless steel material.
Gearmotor driven with power of 1/2 HP.
support Structure totally built in stainless steel 304 square pipes.
-Pelador (peeler) centrpifugo potatoes-Used revised.
Access and support structure with gutter potato power totally built in stainless steel square pipes.
Drum coated in abrasive material, with central axle fixed speed gearmotor driven, power 1/2 HP.
spout with hatch to the potato release, built in stainless material.
-continuous slices Washer-Used revised.
Washer tank totally built in stainless material, complete with drains and discharge valves and cleaning.
Drip mat washed potatoes balanced type, complete with brackets, gears and shafts made entirely in stainless material.
Drive: bike fixed speed reducer with .5 power HP.
-deep Fryer for sliced potatoes-Used revised.
Frying pan totally built in stainless steel plates supported by square tubing structure.
Containment system of the slices of potatoes formed by: single and double reverse blades, mat, totally built in stainless steel.
Drive: inverter variable speed reducer, electronic power 3/4 HP.
Hood for vapour withdrawal of frying, totally built in stainless material, with manual override for withdrawal, engaged the fireplace also in stainless steel.
Mat for continuous withdrawal of French fries, balanced type with traction chains coupled to the side, driven by mechanical back geared motor with variable speed by frequency, power electronic inverter .75 HP.
Disperser for flow Equalization of fat built in plates of stainless material.
Manual regulator valve grease flow coupled directly to the entrance of the deep Fryer pot.
-fat Recirculation pump-Used revised.
Recirculating pump centrifugal type high flow fat, fully built in cast iron, shaft seal by using graphited gasket, engine driven power 30 HP.
-continuous gas heat exchanger, 1.000.000 KCAL-near Mint.
Combustion chamber structure, fully built in square tubes and SAE 1020 carbon steel plates and 1045, isolated and externally coated in aluminum.
Internal recirculation and heating pipes, totally built in stainless steel special heat resistant according to DIN 2448.
Monoblock type burners, with total power of 1.000.000 kcal/h, adjusted and calibrated to work with LPG gas.
Combustion system with diameter 1/2 01:02 class 2 solenoid valves, solenoid valve and pilot 01 01 air filter
drive system with pilot and automatic ignition transformer, pressure switch to minimum pressure of air and gas.
-fat-Storage Tank again.
Built in stainless material, complete with electrical resistance for heating the stored fat. Interconnection between pipe and tank deep Fryer in stainless material.
-drying Mat-New.
Support structure built in folded stainless steel plates.
Hinged treadmill built in stainless material, powered by synchronized gear built in stainless material, and fixed speed gearmotor with .5 power HP.
2 centrifugal fans with powers of 3 and 5 HP coupled to distributors built in stainless material.
Lower suction mat system composed of nylon and collector Cyclone separator in stainless material.
-Aromatizer/feeder-New.
Collector funnel, support structure and transmission box made of stainless material, with electromechanical vibrator with power 1/12 HP.
slotted Cylinder feeder and feeder built in stainless material.
.5 HP power speed reducer with speed variation by electronic frequency inverter.
-vibratory Gutter for separation of fat-Used revised.
Splitter trough built in stainless material, complete with removable strainer for separation of excess fat.
Drive set formed by engine power 01 cv and eccentric double transmitter.
Vibratory system composed of springs of rubber and steel structure, Swiss technology.
Support structure built in square tubes of stainless material.
-cylinder aromatizer-Used revised.
Cylinder Diameter 750 mm x 1,600 aromatizer mm in length built in stainless material, complete with fins and helicoids for homogenization of the product.
Support structure built in square tubes of stainless material, complete with casters for moving the equipment.
Drive: speed power Gearmotor .5 HP.
|
Brand:
Incalfer
|
|
|
Main applications:
Food industry
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
Others suggested equipment for you:
|
|
 |
Brand: J.Plus, Jormary, Silk Mac, Tirelli
Complete line for perfume / fragrance
- Liquid Filling Machine from Italy manufacturer by Tirelli.
- Bottle capper / capping machine from Italy manufacturer by Tirelli.
-Filter stainless steel.
-Continuous Flow Stirred-tank Reactor (CSTR) / bac... |
|
|
 |
Brand: G.Mazzoni, Jones, KHS, Mazzoni, Mazzoni LB, Refrisat
Components: Toshiba, WEG
Consisting of:
- Sigma mixer, production 175 kg mass base, equipment having back and reverse thread, with control board and mats.
- Roll mill mixer for soap brand G.mazzoni 500 kg with control cabinet and outfeed conveyor in stainless steel with... |
|
|
 |
Brand: Emblamaq, Hebleimar, Incal, Loma Systems, Sunnyvale
Cereal bar line composed by:
-mixer.
Brand: Incal.
Material: Stainless Steel.
Year of manufacture: 02/2000.
Model: JAA INC. 400.
Capacity: 400 Liters.
Voltage: 380 V three phase.
Components: 1 motor 11 KW of power.
General features:... |
|
|
 |
Brand: Haas
Industrial line for manufacturing continues to cells/wafer rolls for ice cream and candy.
Maximum: 30 Kg per hour.
Cells without stuffing.
Rolls length-maximum = 230 mm
-minimum = 30 mm
Rolls diameter-Maximum outside diameter 24... |
|
|
 |
Brand: Euromax, GRC, SCM, Tormac, Weldotron
Line stainless steel olives filling.
Composed by:
- Olive bottling plant.
- Accumulator Table bottles.
- Olive reception with stainless steel mat.
- Shipping company.
- Shrinking tunnel.
- Multi head to 10 heads.
Brand: SCM.
With... |
|
|
 |
Brand: Carle & Montanari
Large chocolate industry for sale consisting of:
System of refinement by shells of chocolates and melangeur.
Carle and Montanari refining cylinder.
Chocolate chocolates.
Tanks jacketed for chocolates.
Cooling Tunnels
Packers.
Acc... |
|
|
 |
Complete line of spaghetti consisting of:
-extruder.
-automatic Dryer with complete rods.
-mixers.
-Mill to grind the leftover spaghetti to return.
-2 automatic packaging machines 500 g and 200 g
-Baler.
-boiler.
Production capacity... |
|
|
 |
-36000 m ² in area, located at Km 232 return Washington Luiz, in São Carlos (SP).
-36000 m ² with infrastructure.
-Ideal for shopping, hotel, condominium, logistics, among others.
-central region of the State of São Paulo in Brazil.
-230 Km f... |
|
|
 |
Total area: 30976 m ².
built area: 4370 m ².
raw materials produced in 2013: peach, pineapple and Fig.
products that can be produced: cucumber, marmalade, peas, corn, cherry, olives, beans, honey (project).
... |
|
|
 |
Brand: Ata, Braibanti, Pavan Group
Line composed by:
trademark boiler Ata, with production of 650 kg/h steam with heating surface to 20 m ³, 120 psig working pressure, test pressure 240 psig. GMP equipment fuel with electric control board.
Pneumatic flour with a capacity of 20... |
|
|
 |
Industry of making french fries.... |
|
|
 |
Brand: Pavan Group
Set of Pavan lamination.
Produces chips of pirozhok types and nacho.
1 metre wide
composed of stock preparation system fully automated
Two rolling mills * k12k blanket preparation * A stamping with 4 cylinder molding (pirozhok and nacho)
se... |
|
|
 |
Traditional company in the food area established in the State of São Paulo, currently producing roasted peanuts, peanut candy, wafer type, with great penetration in the domestic market.
we have fiscal dossier, structural, logistical and marketing i... |
|
|
 |
Wheel industry ... |
|
|
 |
Complete industry for manufacture of thermoplastic polymers, resulting in acrylic beads made by injection moulding/extrusion.
The industry has excellent automated production line, allowing it to be produced 400 tons per month of granular acrylic,... |
|
|
 |
Frozen food industry in operation, with registration at ANVISA, fully regulated, installed on site in the city of São Paulo, new equipment, new vehicle fleet, 10 employees registered, no debts and liabilities.
Excellent investment opportunity!
the... |
|
|
 |
Brand: Aucouturier, Haas
Wafer fabrication line.
Located in Tunis, Tunisia.
Descriptions of equipment.
-Thermoformadora
waffer of brand: Haas.
model: Swakt 64.
year: 1994.
dimensions: 290 mm x 500 mm.
voltage: 3 x 220 V, 50 HZ, N/.
-
cooling ARC brand:... |
|
|
 |
Complete machine.
NRO 25 production-2.500 g/m ² the NRO 100-0.625 g/m ²
Manufactures 0.98 m plates x 1.26 m and/or 0.80 m x 1.00 m
Equipment ratio:
forming machine (cylindrical) useful width 1.20 m, 2 (two) hidrapulperes, pumps, pressure pu... |
|
|
 |
We are a company founded on October 15, 1998 focused on the metallurgical branch and industrial automation.
In our staff we have professionals specialized in the areas of design, boiler assembly and maintenance of equipment, ovens, greenhouses
... |
|
|
 |
The project consists of the industrial utilization for health purposes of the compounds present in the avocado, being as, avocado oil, seed and pulp.
we conclude the use of avocado oil with the release of ANVISA, for its marketing as a food suppl... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
|
 |
| |
|
